Special Service Tools for Gardner Diesel Engines
Fuel System Tooling: page 2 of 4

	Centralising Tool Used to centralise and lap the injector valve.	LK, LW, L2, L3, LX, LXB
		G 1043

	Reamer Used to ream the fuel pump control bar bushes. Standard size .030 oversize	L-Types
		G 1044 G 1045

	Fuel Pump Test Bar For testing the serviceability of fuel pump elements.	L-Types
		G 1053

	Injector Pricker Mark Size(mm)	LK, LW, L2 LX LXB L3 LYT LXCT L3B, LXDT
		G 1066 G 1068 G 1067 G 1142 G 1132 G 1147 G 1093

	Endplate Puller Used to remove the fuel pump cambox endplate. May also be used to remove the drive coupling.	LX, LXB
		G 1069

page one | page two | page three | page four

more Fuel System Tooling products >>> back to main contents >>> PRINT THIS PAGE